Longshoreman Shirt - Snow Denim

Fabric: 7.7 Oz. dark indigo-dyed Herringbone Twill (HBT) fabric, blend of 60% linen and 40% cotton. Milled in Japan.

* Inspired by 1930s-40s custom-made private purchase naval dungarees and shipyard crews work clothing.
* Pull-over style “jumper” pattern.
* Half zipper closure placket, 30s/40s-style bell-shaped pull “silver” Talon zipper, 100% cotton tape. (use caution when fastening, as these vintage-style zippers are more delicate than modern versions with polyester tape. Lubricate the metal teeth with natural beeswax occasionally.)
* Fabric cut using vertical cross grain for body and sleeves, displaying the warp horizontally.
* Selvedge displayed in bottom hem, cuff hems, and pocket fold (denim version only.)
* Three front utilitarian patch pockets.
* Concealed chest pocket, stripe ticking fabric.
* Clean chainstitch construction, no open seams.
* Mister Freedom® mfsc woven rayon “SURPLUS” label.
* Made in Japan.  

The MF® LONGSHOREMAN Shirt comes raw/unwashed and is cut so that the measurements match the labeling after an initial cold soak/line dry. 
We recommend this usual protocol before wearing:

• Cold soak for about 30-40mn, with occasional hand agitation.
• Spin dry and line dry.
• Hang until fully dry.

Due to the 100% cotton stitching and specific grain cutting method, attractive puckering will show at the seams after the soak, giving the garment more of a vintage feel.

CL's Advice: I opted for a comfortable 38 (MEDIUM) in both fabric options, both with a similar fit but different drape.

The silhouette is quite slim yet comfortable enough not to make pulling the shirt on/off an excruciating task. According to body types, the cut will accommodate layering with a Mister Freedom® tee or classic Nixon chambray.

We recommend going with your usual mfsc shirt size.

Launder when needed. For both options, we recommend turning the LONGSHOREMAN Shirt inside out, fully zipped-up, to avoid marbling of the fabric.
Machine wash on gentle cycle, cold water, minimum eco-friendly mild detergent and line dry.
Patina will develop according to activities and frequency of wear.

The Mister Freedom® LONGSHOREMAN Shirt features most of the design specifics of the vintage original, the jumper style pattern (aka pop-over), half zipper front closure placket, and three utilitarian patch pockets.

The overall design of this pull-over “jumper” shirt is lifted from a rare 1940s vintage naval denim work shirt produced by the “Gus Kroesen Uniform” label. Established in 1907, and with branches in Seattle, San Francisco and Honolulu, the Gus Kroesen stores have supplied generations of men of the sea with outstanding custom uniforms.

To add a little twist à la MF®, we decided to add a classic period detail in the form of a narrow chin strap, and a practical concealed chest pocket.

The LONGSHOREMAN Shirt is designed in California by Mister Freedom® and manufactured in Japan in collaboration with Sugar Cane Co.